From DC to AC: Russia Modifies Sapsan for a New High-Speed Railway Era

Russia has successfully converted the Sapsan EVS1-08 high-speed train from DC to AC power, potentially opening the door to new routes beyond Moscow–St. Petersburg. The breakthrough comes as Russia prepares its dedicated high-speed railway, raising questions about where the existing Sapsan fleet could operate next.

Must Read

Frontier India News Network
Frontier India News Networkhttps://frontierindia.com/
Frontier India News Network is the in-house news collection and distribution agency.

Russian Railways (RZD) has successfully completed dynamic functional testing of the Sapsan EVS1-08 high-speed electric train after modifying it to operate on alternating current (AC), rather than its original direct-current (DC) configuration. Tests conducted at the experimental ring of the All-Russian Railroad Research Institute (VNIIZHT) in Shcherbinka, near Moscow, have verified that the EVS1-08 can be configured to operate with an AC power supply.

The development is significant for the future deployment of the Sapsan fleet. RZD is currently examining the potential for use of existing Sapsan trains on other railroad corridors as Russia prepares to introduce the Moscow–St. Petersburg high-speed railroad (HSR). The operator could have more flexibility in allocating its high-speed rolling stock across the national railroad network by converting DC-only trains to AC operation.

Specialists from VSM-Service modified the traction equipment, electrical systems, roof-mounted high-voltage components, and associated mechanical assemblies of the experimental train. The successful completion of the tests establishes the technical feasibility of the conversion, although RZD has not yet announced specific new routes or a fleet-wide conversion programme.

Why the Sapsan Requires AC Conversion

In Russia, the Sapsan operates in two main electrical configurations and is based on Siemens’ Velaro high-speed train platform. Originally, the EVS1 variant was intended for direct-current railroad infrastructure, whereas the EVS2 variant was developed with dual-current capability.

The EVS1-08 that was used in the most recent trials was initially designed for use on 3 kV DC electrified lines. Therefore, the EVS2 is capable of operating on both a 3 kV DC and a 25 kV, 50 Hz AC infrastructure.

This distinction matters because Russia’s railway network uses both electrical systems. Although DC electrification is present on important routes, many other railway corridors use 25 kV AC. A train restricted to a single electrical system cannot operate freely across infrastructure designed for a different system without the necessary onboard equipment.

The conversion of EVS1-08 addresses this limitation. RZD has the potential to broaden the operational capabilities of a fleet that was previously limited to DC-powered routes by enabling the train to receive and process AC power.

Major Changes to the Traction System

The conversion involved substantial modifications to one of the train’s two traction sections. VSM-Service specialists installed a traction transformer, a main circuit breaker, an AC current collector, roof-mounted high-voltage equipment, and current-system detectors.

The traction transformer is a particularly important component of the conversion. Unlike a DC-powered configuration, an AC-powered train must convert high-voltage alternating current from the overhead contact system into appropriate electrical power for its traction equipment.

The main circuit breaker provides the necessary switching and protection functions for the high-voltage electrical system. The AC current collector enables the train to obtain power from the overhead contact wire, while the current-system detectors determine the type of electrical supply that is accessible on the railroad infrastructure.

The traction converters were also upgraded to accommodate the modified electrical configuration. The new equipment was connected to the existing traction architecture by installing additional power cables.

Mechanical modifications were necessary as well. The bogies of the carriage carrying the traction transformer were replaced, and several additional components were installed. These modifications suggest the project required more than just installing an AC pantograph. It necessitated integrating mechanical, traction, and electrical systems into the current train architecture.

Dynamic Functional Tests at Shcherbinka

Dynamic functional testing of the EVS1-08 was conducted at the VNIIZHT experimental ring in Shcherbinka after the modifications. The objective was to determine whether the modified traction system could operate consistently and whether the train’s braking and electrical systems would function correctly under the new power configuration.

Traction performance was one of the principal areas examined. Engineers measured the traction force generated by the train and assessed the braking forces during electrodynamic and rheostatic deceleration. These experiments were crucial to determine if the modified electrical architecture could provide the necessary traction performance without sacrificing braking capability.

The testing programme also examined the transition from electrical braking to pneumatic braking. This function is crucial because a high-speed train must maintain effective braking capability if electrical braking is unavailable or cannot provide the necessary force.

Temperature monitoring was another critical component of the initiative. Engineers verified the temperatures of the cooling and working fluids associated with the traction transformer and traction converters. These measurements are instrumental in determining whether the newly installed equipment can operate within acceptable thermal limits.

The main circuit breaker was also tested, alongside the operation of electrodynamic and regenerative braking systems. Regenerative braking enables the return of electrical energy to the electrical supply system when the infrastructure and operating conditions are suitable, as energy is generated during deceleration.

RZD verified that the dynamic functional tests were successfully completed, confirming that the converted train could operate on alternating current.

Moscow–St. Petersburg High-Speed Railway and Future Deployment

Russia intends to build a dedicated high-speed railroad connecting Moscow and St. Petersburg. This conversion is intricately linked to these plans. The new line is anticipated to alter the operational requirements of the Sapsan fleet, which currently operates high-speed passenger services between the two cities.

Existing Sapsan trains may be reassigned to alternative routes if the new high-speed railway assumes responsibility for the main Moscow–St. Petersburg passenger traffic.

There are still numerous questions that have yet to be addressed. RZD has not disclosed the estimated cost or time required for converting each train, nor the number of Sapsan trainsets that could eventually receive the modification. The specific routes on which converted trains might operate have not been identified.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest

More Articles Like This