Russia Unveils New Baikal Chip With 16 MB Memory Built Directly Into the Processor

Russia's Baikal Electronics has expanded its Baikal-U microcontroller family with the new BE-U1000F, integrating 16 MB of Flash memory into its three-core RISC-V design. The new chip retains compatibility with the existing BE-U1000 platform, potentially simplifying the development of Russian industrial controllers, robotics, and embedded electronics.

Must Read

Frontier India News Network
Frontier India News Networkhttps://frontierindia.com/
Frontier India News Network is the in-house news collection and distribution agency.

Russia’s Baikal Electronics has expanded its Baikal-U microcontroller family with the introduction of the BE-U1000F, a new version of its three-core RISC-V microcontroller featuring 16 MB of integrated Flash memory. The new model maintains the core architecture and QFN-88 module of the current BE-U1000, but it changes how manufacturers manage program storage in embedded industrial systems. Baikal Electronics is reducing the necessity for separate memory components on the circuit board and addresses a limitation of the original controller by incorporating additional flash memory within the package.

The development is of great importance to the Russian industrial electronics sector, as manufacturers are currently searching for alternatives to well-established foreign microcontroller platforms. The Baikal-U family is intended for use in various applications, including industrial automation, robotics, motor control, telecommunications equipment, instrumentation, and the Internet of Things. For manufacturers who are creating products that require more intricate embedded software and larger firmware images, the BE-U1000F provides an additional configuration.

Why Baikal Electronics Developed the BE-U1000F

The original BE-U1000 combines three processor cores with 256 KB of embedded non-volatile eFlash memory. Although this capacity is adequate for many conventional control applications, it may become restrictive when developers incorporate complex firmware, graphical interfaces, communication protocols, or applications based on the MicroPython environment.

Traditionally, a solution has been to install an external flash memory chip in conjunction with the microcontroller. Two QSPI interfaces are available on the original BE-U1000 has two QSPI interfaces, enabling external memory connection and supporting execute-in-place (XIP) operation. Furthermore, adding an additional component requires extra routing and takes up valuable PCB space, which increases the complexity of the board.

This requirement is met by the BE-U1000F, which incorporates a separate 16 MB Flash memory die within its QFN-88 package. The controller retains its existing embedded storage in addition to the significantly larger additional memory, as the original 256 KB eFlash is still accessible.

This arrangement gives manufacturers more room for application code, software libraries, configuration data, and other resources without requiring a separate memory chip on the circuit board. Furthermore, it provides a more straightforward hardware configuration for products requiring careful consideration of board dimensions and component count.

Pin Compatibility and the QSPI Trade-Off

One of the most important engineering considerations is compatibility with the existing BE-U1000 hardware design. The BE-U1000 and BE-U1000F are identical in their QFN-88 package, which measures 10 × 10 mm and has a 0.4 mm pin pitch. Their pin assignments are also aligned, allowing manufacturers to consider the new model without redesigning the entire PCB.

However, the additional memory is accompanied by a cost. Two QSPI interfaces are available on the original BE-U1000, each capable of connecting to external Flash memory. Together, they can accommodate up to 32 MB of external storage. One of these interfaces, QSPI1, is internally allocated to the integrated 16 MB Flash memory in the BE-U1000F. As a result, the only available interface for an additional external memory device is QSPI0, which has a maximum supported capacity of 16 MB.

This implies that the BE-U1000F is more than just a BE-U1000 with additional memory included for free. Manufacturers acquire 16 MB of integrated storage, but they forfeit one externally accessible QSPI channel. In numerous applications, removing an external memory component will prove more advantageous than retaining the second interface. However, designs requiring several independent external memory devices will need to account for this limitation.

The BE-U1000F maintains the 48 GPIO lines, two CAN FD controllers, eight UART interfaces, four SPI interfaces, four I2C interfaces, and two I2S interfaces of the original flagship configuration.

Three RISC-V Cores From CloudBEAR

The processing architecture remains one of the distinguishing characteristics of the Baikal-U family. The BE-U1000F is equipped with three 32-bit RISC-V processor cores that are derived from the intellectual property of the Russian company CloudBEAR.

Two BR-350 cores operate at frequencies of up to 200 MHz. These are the main computing units, which are intended to manage the execution of applications, mathematical calculations, data processing, and control algorithms. The architecture is well-suited for applications that require real-time control and numerical calculations, as each core is equipped with floating-point processing capabilities.

The BM-310 is the third processor and can operate at a maximum speed of 100 MHz. It is capable of managing peripherals and secondary operations, rather than duplicating the work of the two primary cores. Additionally, it includes 16 programmable I/O lines, which are referred to as PIO. These enable developers to incorporate custom digital communication protocols into software when the hardware interfaces available do not satisfy the specific needs of a particular application.

This division of processing responsibilities is particularly beneficial in industrial controllers, where the primary processor is responsible for application-level operations, while the secondary processor maintains communication with sensors, monitoring equipment, and control systems.

Additionally, the memory subsystem is crucial. The controller is equipped with 202 KB of SRAM, which includes 170 KB of tightly coupled memory (TCM). The two BR-350 cores share 160 KB of this TCM capacity, while the BM-310 has 10 KB of its own. Additional working memory is provided by the 32 KB of SRAM that remains.

TCM enables the placement of often-used instructions and data in fast, predictable memory, thereby reducing the delays associated with accessing other memory resources. This is especially pertinent for embedded applications that must respond consistently to external events and control loops that are time-sensitive.

Motor Control and Industrial Peripherals

The BE-U1000F maintains the specialized peripheral architecture that renders the Baikal-U platform appropriate for industrial applications. Industrial controllers, robotic systems, electric drives, smart meters, monitoring devices, and automated production machinery are among the equipment for which its hardware is intended.

One of its critical capabilities is motor control. In addition to two general-purpose timers and two watchdog timers, the controller incorporates four PWMA modules and two PWMG modules. These functions enable developers to monitor operating conditions, manage motor-control sequences, and implement pulse-width modulation. The three integrated 12-bit analogue-to-digital converters, each with eight input channels, enable the acquisition of analog signals from industrial equipment and sensors.

Another key element of the design is communication. Two CAN FD controllers are included in the BE-U1000F to facilitate communication with industrial equipment and distributed control systems. In addition, it comprises eight UART interfaces, four SPI interfaces, four I2C interfaces, and two I2S audio interfaces. A USB 2.0 OTG with an integrated high-speed physical layer (PHY) is available to connect external devices without the need for a separate USB PHY chip.

Additionally, two DMA controllers are integrated to facilitate data transfers between peripherals and memory with minimal processor involvement. This is beneficial in systems that operate simultaneously with multiple communication channels and sensors.

The controller is capable of operating within an industrial temperature range of -40°C to +105°C. The silicon itself has a maximum specified operating temperature of +125°C, which provides supplementary thermal tolerance at the chip level. When designing apparatus for demanding industrial environments, it is crucial to distinguish between ambient operating temperature and chip operating temperature.

Positioning Against International Microcontrollers

The BE-U1000F occupies a segment traditionally served by established microcontroller families from international semiconductor manufacturers. It is classified in a similar application category to the more powerful STM32F4 and STM32F7 devices due to its integration of multiple RISC-V cores, motor-control peripherals, extensive communication interfaces, and external memory support.

Baikal Electronics has previously positioned the original BE-U1000 as a functional alternative to these STM32 families. The company has reported performance figures of 1,788 CoreMark and 865 DMIPS for the original controller, in contrast to 1,082 CoreMark and 462 DMIPS for the STM32F7x0 reference used in its comparison. These are manufacturer-reported figures, rather than an independent benchmark of the new BE-U1000F.

The Baikal-U family is also being developed around various hardware configurations, rather than a single controller that is intended for all applications. Different combinations of peripheral functions and communication interfaces are provided by the BE-U1100, BE-U1200, and BE-U1300, which use smaller QFN-48 packages measuring 6 × 6 mm. These versions are designed for applications in which the full capabilities of the three-core flagship are less important than board space, interface requirements, and hardware cost.

The BE-U1000F uses an alternative methodology. It maintains the processing capabilities of the flagship configuration and the larger QFN-88 package while also incorporating Flash memory for applications that necessitate more extensive software.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest

More Articles Like This