Russia has taken another step toward developing a new generation of nuclear fuel designed to retain radioactive materials even under extreme temperatures. A series of reactor experiments has been conducted by scientists working with Rosatom to evaluate the performance of domestically developed TRISO fuel at temperatures exceeding 1,600°C. High-temperature gas-cooled reactors (HTGRs)—a class of advanced nuclear reactors that could eventually supply electricity, industrial heat, and hydrogen production facilities—are the intended application for this technology. More importantly, the development addresses one of the primary challenges of nuclear energy: preventing the release of radioactive materials during extreme operating conditions in a reactor.
Nuclear Fuel Designed to Contain Its Own Radioactive Material
Rosatom’s Research Institute of Scientific Production Association LUCH (NII NPO LUCH) is developing technology based on TRISO, which stands for tri-structural isotropic particle fuel. TRISO uses microscopic spherical fuel particles, each encased in multiple protective layers, in contrast to conventional nuclear fuel, which typically consists of uranium dioxide pellets enclosed in long metallic fuel tubes.
A uranium dioxide (UO₂) fuel nucleus is at the core of each particle. This is enclosed by a silicon carbide (SiC) barrier, layers of pyrolytic carbon, and a porous carbon buffer. These coatings are intended to retain radioactive fission products produced during nuclear reactions when combined.
The concept is relatively simple. The fuel itself incorporates microscopic containment barriers, rather than relying solely on the reactor vessel and external containment systems to prevent radioactive material from escaping. Each particle functions as a protective enclosure on its own. Subsequently, cylindrical fuel compacts for reactor use are generated by embedding thousands of these particles in a graphite matrix.
The silicon carbide layer is particularly significant due to its capacity to preserve structural integrity at extremely high temperatures. TRISO fuel’s multilayer architecture attracts advanced reactors designed to operate at temperatures significantly higher than those of conventional nuclear power plants.
What Happens When Nuclear Fuel Reaches 1,600°C?
The temperature testing is the most significant aspect of Rosatom’s announcement. The Russian development program consisted of 13 reactor experiments, as per the information presented by specialists at the VII International Scientific and Technical Conference on Innovative Projects and Nuclear Energy Technologies.
The fuel was subjected to tests under normal operating conditions at approximately 1,200°C and under extreme conditions reaching 1,600°C. The proposed high-temperature reactor operates abnormally at the latter temperature.
The experiments achieved a fuel burnup of approximately 13% of heavy atoms, an important measure of how much of the nuclear material has undergone fission. The Russian TRISO fuel design’s performance was reportedly confirmed by the results of pre-irradiation studies, reactor experiments, and post-irradiation examinations.
The results of these experiments continue those conducted by Rosatom’s scientific organizations. The corporation reported in December 2024 that previously irradiated fuel samples had undergone over 700 hours of testing at temperatures reaching approximately 1,600°C. Rosatom also reported additional experiments in December 2025, which included tests lasting over 380 hours at temperatures of approximately 1,700°C.
These experiments are important in that they investigate fuel that has already been irradiated, rather than simply heating unused fuel samples. This information is useful for researchers to understand the behavior of protective coatings following exposure to nuclear reactions.
However, the results should not be interpreted as proof that an entire nuclear reactor can withstand every accident scenario at these temperatures. They exhibit the functionality of the fuel samples tested under the specified experimental conditions.
Could This Mean No More Chernobyl?
The comparison to the Chernobyl disaster is understandable, particularly when discussing technologies that are intended to prevent radioactive releases. The 1986 accident at the Chernobyl nuclear power plant demonstrated the consequences of reactor design weaknesses, inadequate safety provisions, and operational failures.
Rosatom is currently developing TRISO fuel for high-temperature gas-cooled reactors, which differ fundamentally from Chernobyl’s RBMK reactor. Under specific operating conditions, its graphite-moderated, water-cooled configuration exhibited a dangerous positive void coefficient. The reactor core was destroyed, explosions occurred, and a rapid power surge was the result of the accident.
TRISO addresses a different part of the nuclear safety problem. Its protective coatings are designed to preserve fission products within individual fuel particles, even in the presence of extreme temperatures. This could reduce the risk of radioactive material being released from damaged fuel.
It does not, however, eliminate the possibility of reactor accidents. Independent safety systems and appropriate reactor engineering are still necessary to address cooling failures, structural damage, equipment malfunction, and other hazards.
Therefore, the significance of Rosatom’s development is not that another Chernobyl has become impossible. It is that advanced nuclear fuel can incorporate an additional layer of protection directly into its construction.
Russia Moves Towards Industrial Fuel Production
In addition to the laboratory results, Russia is also improving its manufacturing capabilities to produce this fuel domestically.
A pilot production line has been established at NII NPO LUCH by Rosatom, involving Russian equipment developers, suppliers, and other organizations within the nuclear industry. The line is designed to manufacture 250,000 fuel compacts annually.
The production process begins with the formation of spherical uranium dioxide fuel kernels. Later, protective layers of silicon carbide and pyrolytic carbon are deposited around the nuclei. The resulting microscopic fuel particles are then compressed into cylindrical fuel compacts and distributed within a graphite matrix.
A high-temperature reactor with a thermal capacity of 200 MW requires approximately one million fuel compacts for a complete core loading. This shows how much the technology must be manufactured before it can support commercial reactor operations.
Therefore, the pilot production line serves as a critical intermediary between the development of experimental fuels and industrial manufacturing. It also provides Russian manufacturers the opportunity to develop domestic production processes and quality-control capabilities for a specialized nuclear fuel that requires a high degree of precision.
Beyond Electricity: Hydrogen and Mobile Nuclear Power
The potential applications are not limited to conventional electricity generation. Based on high-temperature gas-cooled reactors and an associated chemical processing facility, Rosatom is developing a more comprehensive atomic energy and technology station concept.
One goal is to use high-temperature nuclear radiation for industrial processes, such as the production of ammonia and hydrogen. These applications have the potential to decrease the reliance on fossil fuels to provide the high temperatures necessary for specific chemical manufacturing processes.
Industrial facilities that necessitate continuous heat could also be supported by high-temperature reactors, while future compact reactor designs may provide thermal energy and electricity in remote locations. Rosatom has also identified mobile or transportable nuclear energy systems and small nuclear power installations as potential applications for its fuel technology.
Further reactor development, fuel qualification, licensing, and industrial deployment are all necessary to realize these opportunities. However, establishing a domestic TRISO manufacturing capability is a critical step in rendering these reactor concepts technically feasible.
