A new carbon-based electronic structure has been developed by Russian researchers. This structure has the potential to serve as an alternative to traditional silicon components in environments subjected to extreme temperatures, radiation, and demanding operating conditions. The proposed technology combines two types of carbon: synthetic diamond and graphene. This structure combines mechanical strength, thermal stability, and electrical conductivity.
The research was conducted at the World-Class Research Center for Electronic and Quantum Technologies Based on Synthetic Diamond, part of the National Research Nuclear University MEPhI (Moscow Engineering Physics Institute). The researchers examined the potential for vertically oriented graphene layers to bond with the crystalline surface of cubic diamond using quantum-mechanical modeling. Their calculations suggest that the interface can establish stable chemical bonds and produce local electronic states that facilitate electrical conduction.
The work addresses a significant obstacle in developing diamond-based electronics: the establishment of dependable electrical connections to diamond without compromising its crystal structure. The technological challenge of converting the advantages of diamond into practical semiconductor components continues, even though it possesses several properties that make it appealing for advanced electronic devices.
Why Combine Graphene and Diamond?
Diamond and graphene are two structurally separate forms of carbon. Graphene is composed of a single atomic layer in which carbon atoms are arranged in a hexagonal lattice. It is known for its exceptional mechanical strength, high electrical conductivity, and capacity to efficiently transport charges. In contrast, diamond has a three-dimensional crystal structure characterized by strong covalent bonds between carbon atoms.
Diamond’s broad bandgap of approximately 5.47 electronvolts, in contrast to silicon’s 1.12 electronvolts, renders it particularly appealing for electronic applications. Its high thermal conductivity also enables efficient heat discharge. In addition, diamond has considerable resistance to radiation-induced damage, making it a candidate material for electronic systems operating in demanding environments.
However, the electrical properties of diamond also present challenges. It is challenging to introduce and regulate charge carriers using conventional semiconductor manufacturing techniques due to its wide bandgap. Another obstacle is the establishment of electrical contacts that are dependable. Researchers therefore need ways to introduce conductive pathways without damaging the underlying diamond crystal.
The MEPhI approach aims to resolve this issue by integrating the electrical properties of graphene with the three-dimensional crystal structure of diamond.
How the Diamond–Graphene Structure Works
The researchers examined a heterostructure that consists of vertically oriented graphene sheets that are attached to a cubic diamond surface. Vertically oriented graphene structures, in contrast to conventional graphene layers that are arranged horizontally on a substrate, extend outward from the surface, thereby establishing an interface between the two carbon configurations.
The main question was whether these materials could establish a stable connection at the atomic level. The electrical stability necessary for semiconductor applications would not necessarily be achieved through a straightforward physical contact. The connection must maintain structural stability while simultaneously permitting the controlled movement of electrical charge.
The MEPhI team investigated a variety of potential graphene layer configurations in relation to the diamond surface through the use of quantum-mechanical calculations. They examined the stability of the resulting atomic configurations, the energy characteristics of the interface, and the distribution of electronic charge.
The calculations show that stable covalent bonds are formed between the graphene and diamond structures. Rather than just bringing two seperate materials into physical contact, these bonds effectively establish a chemical connection.
The researchers, more importantly, identified local conducting electronic states at the interface. This is noteworthy due to the fact that pure diamond typically exhibits electrical insulating properties under typical circumstances. The electronic environment at the boundary is changed by the introduction of graphene, which establishes regions that permit the movement of electrical charge.
In practical terms, the interface could offer a method of regulating electrical conduction in a material that has a very low conductivity.
Potential Applications in Transistors and Sensors
One of the most important potential applications is the development of carbon-based transistors. To regulate current, conventional semiconductor devices use meticulously engineered regions with different electrical properties. By leveraging the electronic properties produced at the interface between the two carbon materials, the diamond–graphene structure may offer an alternative approach.
The potential for the development of transistors, diodes, and photodetectors on an integrated carbon-based platform may be realized if researchers are able to experimentally replicate the predicted structure.
Photodetectors are particularly interesting because diamond has properties that could support operation in environments where conventional optical and electronic components face difficulties. Such components could be examined for the purpose of detecting radiation, ultraviolet light, and other forms of electromagnetic energy, contingent upon the final device architecture.
High-temperature power electronics is another potential application. Electronic components are often required to operate in close proximity to heat sources in industrial systems, aerospace platforms, and energy installations. As operating temperatures rise, conventional silicon devices face thermal-management challenges, reduced reliability, and increasing leakage currents.
In these circumstances, diamond’s thermal conductivity and wide bandgap provide advantages. Combining them with graphene could achieve the electrical pathways needed to create functional devices without relying entirely on conventional metal contacts.
Why Radiation Resistance Matters
Another major rationale for investigating diamond-based electronics is their ability to withstand radiation. Equipment, satellites, and spacecraft that are located in close proximity to nuclear reactors are susceptible to ionizing radiation and energetic particles. Defects in semiconductor materials, modifications to electrical characteristics, and ultimately component failure may result from such exposure.
Diamond is regarded as an appealing material for radiation-resistant electronics due to its wide bandgap and robust carbon bonding. It is currently under study for the development of radiation detectors and specialized electronic components.
A graphene–diamond heterostructure has the potential to integrate conductive regions that facilitate electronic functionality with radiation-resistant structural properties. This renders the concept important to nuclear instrumentation, monitoring equipment, and spacecraft electronics that operate in high-radiation environments.
Another potential application is the use of deep drilling equipment. Sensors that are installed in deep wells must be capable of withstanding mechanically demanding conditions, pressure, and elevated temperatures. The reliability of this equipment could be improved by the use of electronics that are built from materials that exhibit superior thermal and structural stability.
These applications are still considered to be promising. The radiation tolerance, operating temperature, and service life of a completed graphene–diamond device are not determined by the modeling. Experimental testing would be required to demonstrate those attributes.
International Research and Prior Developments
The idea of combining graphene and diamond is not entirely new. Researchers in other countries have explored methods for integrating these two carbon structures to develop sophisticated electronic materials.
In 2020, researchers from Dongguk University and the Korea Institute of Science and Technology (KIST) examined the integration of diamond with vertically oriented graphene. Their research illustrated the feasibility of establishing graphene layers on a diamond surface through hydrogen-plasma-assisted chemical vapor deposition at a temperature of approximately 1,300°C. Additionally, the researchers examined the potential for this surface hybridization to change the electronic structure of diamonds.
Russian researchers have also been conducting research on comparable methodologies. In June 2025, researchers from the Nikolaev Institute of Inorganic Chemistry of the Siberian Branch of the Russian Academy of Sciences reported the formation of a conductive layer on diamond that resembled graphene. The diamond surface was converted into a conductive carbon layer through the application of a metallic coating and subsequent low-temperature annealing in their method. The objective of the project was to create electronic circuits directly on diamond substrates without the need for additional metallic contact layers.
In conclusion,
MEPhI’s research provides a potential pathway to carbon-based electronics by integrating the electrical conductivity of graphene with the thermal and radiation resistance of diamond. The modeling identifies a promising atomic-level connection that could ultimately support specialized transistors, photodetectors, and sensors for extreme operating environments, although practical devices remain a future objective.
