The Radio-Electronic Technologies Concern (KRET) has delivered the first 22 sets of domestically developed flight-recording equipment for the import-substituted SJ-100 passenger aircraft to Yakovlev, as Russia officially began serial deliveries. The new equipment replaces foreign-made recorders previously used on the aircraft. The flight data recorder (FDR) on the Sukhoi Superjet 100 (RRJ-95B) was manufactured by the U.S. aerospace company Honeywell (specifically model HFRS-D), while components of the avionics and voice recording systems involved suppliers like Thales.
First Serial Deliveries of Russian Flight Recorders
Yakovlev’s Regional Aircraft Division has received the first 22 units of serial-production onboard recording equipment from KRET, a subsidiary of the Rostec state corporation. The equipment was developed by KRET research institutes and manufacturing enterprises in response to technical requirements specified by Yakovlev.
The delivery signifies the transition from development and testing to serial production of the recording system designed for the import-substituted SJ-100. Rostec has confirmed that the equipment has been tested and has received certification approval from the Federal Air Transport Agency, Rosaviatsia, thereby validating its suitability as an aircraft component.
The flight recorders are a component of the broader effort to replace foreign systems aboard the SJ-100 with domestically developed alternatives, and they replace previously imported equipment.
Alexander Dolotovsky, Yakovlev’s deputy managing director and director of its regional aircraft division, stated that the company has been collaborating with Russian industrial companies on the substitution of aviation-system imports since 2019. He identified the new flight recorder as a tangible outcome of the program, highlighting Russia’s regained capabilities in developing, certifying, and producing modern civil aircraft and onboard equipment.
A Seven-Unit Recording System
The new recording complex is significantly more advanced than a traditional flight data recorder. It consists of seven separate units, two of which are protected data-storage devices, and a fallback power source that is intended to ensure the continuity of recording in the event that the aircraft’s electrical supply is disrupted.
The system maintains various categories of information that are relevant to aircraft operations and safety investigations. These consist of flight parameters, cockpit conversations, video imagery from the cockpit, and communication messages exchanged between the aircraft and ground services. This combination enables investigators to reconstruct flight events from various sources, rather than relying only on individual flight parameters or audio recordings.
Further, the recorded data has applications that extend beyond accident investigation. Engineers can analyze data to evaluate the performance of aircraft systems, identify operational irregularities, and evaluate the behavior of onboard equipment. The primary objective of crash-protected recording equipment is to preserve evidence in the aftermath of an accident. However, the data gathered during routine operations can also improve aircraft safety monitoring and reliability studies.
The architecture of the system includes redundancy through alternative power arrangements and protected storage. This is especially critical due to the potential for onboard recording equipment to be disrupted by electrical malfunctions or severe structural damage during an accident. Accordingly, the system’s design fundamentally relies on the preservation of recorded information and the continuity of recording.
Designed to Survive Extreme Accident Conditions
The recorder’s protected storage units are intended to safeguard flight data in the event of a severe aircraft accident. Their protective structures have undergone tests involving high mechanical loads, crushing forces, and exposure to extreme temperatures.
The devices can withstand an acceleration load of up to 3,400 g, as per KRET. In addition, they are intended to maintain the recorded information even after exposure to open flames at 1,100 degrees Celsius for one hour. The equipment can withstand pressure equivalent to that at a depth of 6,000 meters underwater.
These are the test capabilities of the protected recording equipment, as reported, rather than the conditions encountered during typical aircraft operation.
The underwater capability is especially relevant in the event of aircraft accidents that occur over bodies of water, such as lakes, seas, or oceans. Each recorder is equipped with an underwater acoustic beacon that assists search teams in locating the equipment following an aircraft crash into water.
Such beacons emit acoustic signals that specialised search equipment can detect. The location of the recording devices is a critical component of accident investigation, particularly when the wreckage is dispersed across a large area or submerged.
The protective enclosure of the recorder is built with the notion that the information it contains must be retrievable regardless of the extent of the aircraft’s damage. The survival of the data is ultimately more critical than the survival of the recording device’s external structure or electronics.
Modular Architecture and Broader Aviation Applications
The modular architecture for onboard avionics has been used to develop the recording system. This method, as per Rostec, enables the equipment to be customized to accommodate various aircraft types without necessitating a new recorder design for each platform.
Particularly as Russian aircraft manufacturers plan to standardize domestically developed avionics across multiple aircraft programs, modularity has the potential to streamline future integration, maintenance, and production processes. Nevertheless, the requisite engineering work, testing, and certification would still be necessary for the adaptation to another aircraft.
The new recorders are a component of a broader initiative by KRET to create and produce domestic avionics for the SJ-100. Russian flight-control systems, navigation equipment, and other onboard electronics were previously developed with the intention of replacing foreign components. These systems have been gradually integrated into the SJ-100 program as the aircraft progresses through its certification process.
